01 The product
76mm hub caps in a sand-cast finish.
Porsche 76mm diameter Hub Caps in a sand cast effect finish.
Colour match your hub caps to your car with a set of 4 bespoke 3D Printed Hub Caps featuring a colour logo and a subtle sand cast effect background.
Add a splash of colour and interest to your beautiful 5 stud Porsche wheels.
3D Printed in the UK using a high temperature resistant polymer with a subtle sand cast effect background. The highlight colour is also 3D printed into the Cap (not a decal).
• Set of 4 Hub Caps supplied
• Unique Clip Fit System for push fit/pull removal
• Coloured script printed into the Hub Caps (no decals)
Suitable for all modern Porsche 5 stud wheels with a 76mm hub cap. Replace those worn out crest hub caps and match your brakes, body colour or your contrast colour.
Fitting
1. Remove your old hub caps and clean the area. If you don't have the official tool, an Allen Key works just fine.
2. Gently place your new WDT Werks Hub Caps over the hole in the hub of the wheel.
3. Rotate the hub cap to the correct orientation. The text should be legible when the valve stem is at the 6 o'clock position on a watch dial. Its the Porsche Way.
4. Gently push the hub cap in and it snaps in place.
Removal
Use a hook tool (or an Allen Key) to remove the wheel cap if required.
1. Slip the tool into one or both holes within the hub cap and gently pull out.
2. The hub cap will snap out of the wheel.
Care
These are 3D Printed items. Never bend the clips by hand. They are intended to give a very small amount for fitting and removal only.
Clean gently with your regular car shampoo. Dry and ceramic coat or protect with detailing spray, plastic restorer etc. Avoid strong wheel cleaners and acidic/alkali cleaners.
Be gentle as these items are plastic and we want you to use them for a long time!
